Data Ram & Sons

We are dealing in Gates Poly Chain Belts. We are also having wide range of products that.

Also Available in:

• Number Of teeth - 60 - 90
• Width 20 - 35mm

To meet the multiple-bend and dual-power requirements, we build Double V Belt with rugged Vytacord tension members. They deliver maximum strength with minimum elongation. They also work with all the other quality materials that are a part of our Hex belts to deliver maximum performance over a long, trouble-free life. Hex belts are available in AA, BB and CC cross sections. A special Dry Can Hex construction is available with a special deep CC cross section designated CCP.

Also Available in:

• Temperature -54 to 129 Deg F
• Thickness 10-14mm
• Length 5 -7 Meter

HY-T® Plus improved materials are the key to its durability and versatility. Whether you are talking about rubber belts or metal chains, most materials will elongate when put to use. The secret to reliable performance is not to eliminate elongation, but to control it so that it is minimal, predictable and uniform. To achieve these criteria, we developed the Vytacord tensile member.

Vytacord provides the high-strength, high-horsepower rating capacity needed to effectively transmit today’s drive power. It is even tough enough to tolerate slight sheave misalignment that would quickly destroy ordinary belts. The Vytacord tensile member provides dimensional stability. As a result, each belt of a given size will maintain its length consistency, no matter when or where it was produced. The exceptional dimensional stability properties of HY-T Plus eliminates matching problems, improves performance and increases service life.

Our engineered heat- and oil-resistant rubber compound is used in both the cushion and insulation sections of HY-T Plus. Belt construction provides the flexibility on small pulleys. As a result the belt is able to serve a dual purpose for both Classical and FHP, while offering more versatility than any other Classical belt.

The Poly-V® belt is a single, endless belt with longitudinal V-shaped ribs that mate consistently with the V-grooves in the sheaves. It combines the convenience of a thin, one-piece flat belt with the strong gripping traction of multiple V-belts to make the Poly-V belt far better than either for many applications.

To distribute the drive load evenly across the full width of the sheave, the Poly-V belt is built as a single unit with a completely supported, uninterrupted tension member. There is no matching problem. No separate belts to turn over, grab, slip or interfere with each other. The thin cross-section profile allows use of smaller pulleys than standard V-belts and Poly-V belts handle speed ratios of 40:1.

With all this capacity, the Poly-V belt tracks properly without special guides, flanges, crowns or deep grooves. And it resists seating in the grooves, so speed ratios remain more consistent and output speed remains more uniform.

Also Available in:

• 10-22mm

We are engaged in offering our clients with Poly V Belt, these belts are widely demanded by the clients for their quality and are appreciated by the clients.

Features:

• These belts eliminate belt matching and permits drive design to meet exact power or space requirements.
• They permit cooler running and high drive efficiency.
• These belts excel on small pulleys at high speeds.

Wedge cross-section means the belts are narrower and weigh less. Narrower belts allow for the use of thinner and lighter sheaves, resulting in a more efficient drive. The savings continue through the higher horsepower capacity provided by HY-T V-belt construction. Vytacord tension members provide strength and dimensional stability. Higher horsepower capacity is also provided through a tough engineered rubber compound cushion, adding to belt strength.

HY-T Wedge, with its narrow cross-section, makes it possible to achieve a required horsepower with fewer HY-T Wedge belts than with standard V-belts, reducing sheave size, sheave costs and belt costs even more. Since less power is required to run the smaller, lighter drives, more power gets to the load. Therefore, you may be able to downsize drive motors and/or increase drive efficiency for even more savings. HY-T Wedge envelope belts are identified with a 3V, 5V or 8V prefix and are recommended for drives where pulsation, shock loads, high tension and long centers are involved.

It features a continuous V-section that is protected by a wide angle, synthetic fabric impregnated with high-quality engineered rubber compound. This unique envelope achieves the high strength HY-T Wedge belts need to withstand high loading forces. It also provides the torsional rigidity required in long center drives delivering the traction needed for accurate tracking and precision performance.

Also Available in:

• Temperature -40 to +139 Deg C
• Length Range 550 to 3540 mm

Neothane® V-belts can provide a different approach to V-belt power transmission for appliances and light-duty machinery. The features of the belt will make it possible to gain competitive advantages in many areas of application.

Advantages:

• Smooth operation due to precision belt characteristics
• Reduced maintenance provided by its resistance to elongation or shrinkage
• Ribbed top for transverse rigidity, flexibility and cool running conditions
• Conditionally resistant to oil

Technical Specifications:

• Polyurethane
• Ribbed top
• Polyester tension member

Width 10mm